HJC FS-15 Helmet Review

Pete Brissette
by Pete Brissette

Like a lot of things in the world of retail, the more technology improves, the more a product will benefit, usually increasing in quality and availability while prices actually come down. Remember when what seems like only a few years ago the most basic DVD player or flat panel computer monitor cost hundreds of dollars? Now cheap DVD players are given as thank you gifts for opening a checking account.

Same is coming true of motorcycle helmets. While there are still plenty of pricey, top-shelf lids from companies such as Arai, Shoei or AGV, there’s been a proliferation of low to mid-priced helmets in the past three to five years. These newer, or new-to-the-U.S.-market, helmet companies had to overcome the stigma of being made in countries other than Japan, Italy or the U.S, but they listened, learned and adapted, so today the choices of quality helmets available in the sub-$300 category seems greater than ever.

hjc fs 15 helmet review, The HJC FS 15 helmet in Surge graphics
The HJC FS-15 helmet in Surge graphics.
In the interest of fairness, and after years of being a scoffer, I decided to give HJC a try. In short, I’m impressed. The hat I gave a go is the company’s full-face FS-15 model. The shell is made from a fiberglass composite with the help of CAD.

The shield is a “3D design” that claims to provide 95 percent UV protection along with an anti-scratch coating and is ready to accept HJC’s anti-fog insert called, Pinlock. The shield uses a proprietary tool-less removal system; it comes on and off with no more or less effort than most other tool-less systems I’ve used, including those on pricier helmets. I prefer shield ratchet systems that have multiple opening positions. The FS-15 only has two: half way or full open. It can be popped open just a skosh from closed for increased venting. One other shield feature is the locking tab on the left side that prevents it from blowing open when you’re screaming down the road. Thus far I’ve not used the lock, but neither has the shield been sucked open by the wind.

hjc fs 15 helmet review, Rear exhaust vents are part of the spoiler at the back Venting is at worst average
Rear exhaust vents are part of the spoiler at the back. Venting is, at worst, average.
Liner material is moisture-wicking, anti-bacterial, and can be removed for cleaning. A cloth wind curtain below the chin keeps drafts out while helping quiet wind noise. Wind noise is also average compared to other helmets I’ve worn. A removable breath guard comes standard and helps keep that menacing look even when the shield is open.

The chin strap is secured via the ubiquitous double D-ring, and has a snap on the long end to secure excess strap from slapping you in the neck.

There are two vent openings located in the usual spots: the chin bar and forehead. The ventilation system includes what HJC calls “channeling vents.” In essence they are exhaust vents with a subtle but good looking wire mesh cover. Exhaust vents are located relatively close to the chin vent, and in the mid-rear as part of a spoiler. Like the tool-less shield removal system, I can’t say the venting is significantly better or worse than most other helmets I’ve worn.

I chose the Surge MC-5 (black) design scheme. Paint and clear coat is excellent with a smooth gloss finish. Painted-on rather than sticker logos enhance the look and general quality that belie the helmet’s $239.99 MSRP. Prices for the FS-15 range from $219.99 to $269.99 based on color scheme.

So, with all the good things going for this helmet, including its reasonable 3 lb, 10 oz. weight as measured on my Dualit kitchen scale, there has to be a catch, right?

The one caveat with HJC is that, in my experience, they tend to run one to two sizes too big. Typically I take a medium in most brands, but I know HJC run a tad big so I opted for size small. Had I selected medium in the FS-15 it simply would’ve been too big. The small is livable, but I’ve worn an extra small in a different HJC model, and though that size created a bit of a hot spot on my forward, overall it was a more secure fit.

hjc fs 15 helmet review, Paint quality like most of the rest of the helmet is very good
Paint quality, like most of the rest of the helmet, is very good.

Roomy fit aside, this DOT and SNELL certified helmet offers good value in just about every area. It’s one more of a growing number of quality helmets that looks and functions like a lid twice the cost.

Related Reading:

Scorpion EXO-1000 Helmet Review
KBC Super-X Helmet Review
Ducati Hi-Tech Jacket Review
Alpinestars Ice Leather Jacket Review

Join the conversation