Ballistic Performance Component Batteries

New batteries for powersports applications

By Press Release, Dec. 22, 2010
Ballistic Performance Components is proud to announce the launch of the new EVO 2 Series of light weight lithium ferrous batteries for powersports applications.

Your powersports vehicle is the pinnacle of modern technology. It is made with the latest lightweight, high-tech materials to be the most high performance vehicle on the road, lake, track or trail. You have modified your powersports vehicle with the best in carbon fiber, titanium, and magnesium in an effort to gain every last ounce of performance. Yet, under your seat is a heavy hunk of lead that was designed in the mid 1800’s.

Ballistic Performance Component Batteries use the latest, state of the art lithium ferrous energy storage technology available to provide you with a smaller, lighter, higher energy battery. Each Ballistic Performance Component Battery is assembled by hand in the USA using computer designed custom proprietary cells, cases, and hardware. As a result, Ballistic Performance Component Batteries will provide more energy out of a smaller package while requiring almost no regular maintenance and, under most conditions, a longer service life than existing lead acid batteries.

Ballistic Performance Components Batteries are made up of high-tech lithium ferrous cells and can weigh as much as ten pounds less than the lead-acid equivalent battery that comes stock in your powersports vehicle. Built to meet the rugged demands of professional racing, Ballistic Performance Components Batteries give a new meaning to the term “maintenance free.” With no special chargers or preparation required and a static discharge rate of less than 10% per year, a Ballistic Battery can be installed and forgotten about. Ballistic Performance Components Batteries are completely non-toxic and environmentally friendly so there are no worries about shipping, recycling, or sourcing acid locally. Ballistic Performance Components Batteries come ready to install and go!

- Up to 80% smaller than the stock battery
- Up to 10lbs Lighter than the stock battery
- Service Life of over 2000 cycles
- EVO 2 Batteries use hard mounted brass terminals for a direct replacement installation
- Completely “dry” technology so batteries can be mounted on their side or even upside-down.
- Completely non-toxic, recyclable, and can be air shipped
- Applications for bikes from 50cc - 1800cc
- Tested extensively by professional race teams
- Impact and water resistant
- 90 day free replacement warranty
- No special charger required.
- No trickle charger required, loses only 10% of charge over a year of static use.

4 Cell Model EVO 2 (101-001) - $135.99
Dimensions: 60MM (L) x 60MM (W) x 100MM (H)
Weight: 385 grams, 13.6 oz
Voltage (Charged): 13.6V
Amperage: 2.3Ah
Cold Cranking Amps: 120A pulse
Operating Environment: -30°C (-22°F) to 60°C (140°F)
Typical Application – 600cc and Under

8 Cell Model EVO 2 (101-003) - $237.99
Dimensions 113MM (L) x 60MM (W) x 100MM (H)
Weight 730 grams, 1lb 10oz
Voltage (Charged) 13.6V
Amperage 4.6Ah
Cold Cranking Amps 240A pulse
Operating Environment -30°C (-22°F) to 60°C (140°F)
Typical Application – 650cc – 1000cc Multi Cylinder

12 Cell Model EVO 2 (101-005) - $349.99
Dimensions 113MM (L) x 87MM (W) x 100MM (H)
Weight 1045 grams, 2lb 5oz
Voltage (Charged) 13.6V
Amperage 6.9Ah
Cold Cranking Amps 360A pulse
Operating Environment -30°C (-22°F) to 60°C (140°F)
Typical Application – 1000cc and Over

Dealer Inquires Welcome!!!

For Information: