Then in 2006, the R6 received a ground-up overhaul that resulted in a package that many judged to be the tastiest eye-candy in the segment. That (plus an optimistic 17,500-rpm tachometer) garnered plenty of attention among consumers and the media alike. This flash and controversy somewhat overshadowed a stellar chassis and the bikeís less-streetable character from its racy ergos and the engineís top-heavy powerband.
So in this mid-cycle revision for í08, the tweaked R6 has a bolstered midrange punch and even better handling dynamics in the face of new-for-2007 challengers from Honda and Kawasaki, plus a revised GSX-R600 from Suzuki for í08. Yamaha invited Motorcycle.com to the hills and twists of Laguna Seca near Monterey, California, so we could gleefully sample the latest iteration of this sportbike sales success: R6 sales are up 44% since 2001.
This is a critical class for all manufacturers of sportbikes. The 600cc segment makes up 51% of what Yamaha calls the Supersport market, a segment that is up in sales a huge 52% since 2001.
The key change to this new R6 is an engine that is architecturally the same but has received some 50 refinements to improve how it delivers its power. Working in conjunction with the bikeís existing YCC-T ride-by-wire throttle is another techie acronym we first saw in last yearís R1: YCC-I, which is a variable-length intake trumpet stack called Yamaha Chip Controlled Intake. At lower revs, the intake air is fed with the fuel-injectionís velocity stacks in their long configuration for enhanced torque output. But the system electronically converts to a short intake tract at 13,700 rpm for optimum performance at the top-end.
Yamaha showed us a dyno-chart comparison of this new model against last yearís that demonstrate a stronger midrange plus even more power up top. Although the chart didnít have numbers on it that show exactly the parameters of the power comparison, the curve of the new bike was clearly stouter in the upper midrange. Peak torque now arrives 1000 revs sooner at 10,500 rpm. And at the upper end, a Yamaha rep revealed to Motorcycle.com that horsepower at the rear wheel handily exceeds 110.
Rocketing out of Lagunaís Turn 11 and onto the front straight reveals seat-of-the-pants impressions that back up the dyno chart, although the R6 still canít be described as torquey. As before, strong power arrives only once past 10,000 rpm, but now the hit is superior in its quality and quantity. From that point, thereís a 6000-rpm strata of ripping high-end power that is a joy to crank up around a racetrack. As long as you use the excellent gearbox to keep the engine in this bountiful range, the R6 will be hard to catch by any other middleweight.
The changes to this yearís R6 go much further than the engine room. Yamahaís testing guy Mike Ulrich stated in his presentation that itís ďa brand-new bike from the tires up.Ē While the chassisís geometry remains unchanged (24.0-degrees rake; 3.8 inches of trail; and a 54.3-inch wheelbase), the cast-aluminum frame has received a major overhaul. In the quest for the optimum balance between rigidity and flex to achieve the finest feedback to the rider, a crossmember was removed from between the frame rails which are now thicker and stronger. The net result is incrementally increased flexibility in all three axes.
It probably helped that the R6ís senior project engineer, Kouichi Amano, comes from an extensive testing background and can haul ass around a racetrack. ďThe concept is razor-sharp handling,Ē the gracious Japanese engineer told Motorcycle.com, ďand front-end feedback is more better than current R6. This model is more for track riding, so we made it sharper handling.Ē
Amano and his team also made revisions to the R6ís aluminum swingarm, adding some internal ribbing and replacing an extruded-aluminum section with a new forged piece for less overall flex. The R6ís aluminum subframe is replaced by a magnesium casting in a first for a large-scale production bike, with a weight saving of 1 lb in a critical area for attaining best mass-centralization.
Yamaha research shared during the R6ís presentation revealed that annual track miles for the 600cc Supersport class have gone up 42% from 2004 to 2006; for the R6 in particular, track usage is up an incredible 86%. As such, Yamaha has fitted slightly stiffer springs in the front and rear suspension of the new R6 to keep it taut under the rigors of track abuse. And to retain the proper steering geometry when spooning on larger-diameter rear race rubber, Yamaha has thoughtfully endowed the new R6 with greater attitude adjustments in the form of longer fork tubes and a rear ride-height adjuster Ė with some race rubber, last yearís bike required the fork tubes to be positioned below flush in the upper triple clamp.
Adjusting ride heights at Laguna Seca wasnít an issue, as we would be riding on the bikeís stock Dunlop Qualifiers. A ďPTMĒ designation indicates a tire developed specifically for the R6, with a slightly more pliable sidewall. These Qualifiers didnít immediately endear them to the assemblage of journalists, as cold track temperatures conspired to keep grip levels low. Further holding back my confidence in my first session were suspension settings that were too stiff for my scrawny little frame, which werenít allowing the tires to be worked hard enough.
It performed so well that I couldnít imagine a change that would improve it...
The astute Ulrich took a step of spring preload out of both ends of my bike and reduced the forkís new high-speed compression damping circuit. The result was a bike that now responded perfectly. A slight increase in front-end dive made the front tire dig in harder, and turn-in response that was initially reluctant became easier. I also noted an increase in rear-end grip, and soon the tires were scuffed all the way to their edges. With these settings, the R6 responded kindly to pavement imperfections and felt much more composed. It performed so well that I couldnít imagine a change that would improve it, so the eager wrenches in the pits sat idle for the rest of the day.
With the setup dialed in, I could now concentrate on the nuances of how the R6 performed while re-learning a track I hadnít ridden on in more than three years. Despite having been repaved twice in the past two years, the track surface has a few chewed-up spots in a couple of corners, but the more compliant suspension happily shrugged them off. Feedback from the bike was plentiful, and Iíd rate it improved over the previous iterationís admirable chassis communication. Several of the motojournalists in attendance reported front-end slides as the tires struggled early with grip, but not one rider had a rubber-side-up result all day. (We canít say the same about another web-zineís ďdailyĒ author on the previous dayÖ)
The aspect of the bikeís performance most appreciated is the revised engineís flawless throttle response. I experienced none of the digital-feeling abruptness common among many fuel-injection systems, either while coming back on the throttle or while closing it when slowing for corners. Yamaha has cleverly modified the new EFI to allow some fuel to continue to flow through the throttle bodies under trailing-throttle conditions. This, combined with a mostly excellent slipper clutch, removes harshness from the driveline during corner entries, allowing a rider to focus on brake modulation while getting the bike adequately slowed.
When it comes to brakes, the old R6 wasnít really lacking. It already enjoyed the benefits of features like radial-mount one-piece calipers, a radial-pump master cylinder and generously sized 310mm front rotors. For í08, the twin discs up front have been widened by a half millimeter to 5.0mm for additional heat-shedding properties, and itís hard to imagine a better combination of power and feel from a set of binders in this class. The bikeís slipper clutch is unchanged, and it proved flawless when banging down a couple of gears for Lagunaís Turn 2 Andretti Hairpin or the positive-camber Turn 5. A slightly harsh downshift was revealed only into the first-gear Turn 11 that precedes the trackís front straight.
By the time the Turn 1 crest in the road has your butt flying off the seat, an R6 rider is almost all the way through fourth gear. I predict the R6ís upper-range power is superior to all its class rivals, and on the racetrack, itís easy to keep the shrieking, rev-happy mill on the boil. Only racers or Group A trackday riders will require more ground clearance than whatís offered with the R6ís footpeg feelers removed, offering a claimed 57-degree lean angle.
As for how the bike might perform on the street, we can only estimate, as all our time on the pre-production bikes was spent on the 2.2-mile racetrack. However, clip-on handlebars that were already quite low have been lowered a further 5mm (they are also 5mm further forward, but so is the seat), which wonít be appreciated during long slogs on the street. And the limited amount of time we spent with the tach below 10,000 rpm did expose that the R6 still has a way to go to match the amazingly punchy CBR600RR.
One thing that wonít hold back the R6 for street riders is its creatively distinct styling that has made it a class favorite. Bodywork looks very similar but is all new, with a slightly more aerodynamic appearance. Its arresting stealth-fighter edginess remains. The most stylistically appealing bit is a new tailsection that is thinner when looked at in profile. Itís a bit wider across the beam, and it incorporates a few new interesting facets. The riderís wide seat remains unchanged.
Pricing is in line with the R6ís weight: up incrementally. The three main color choices of the black Raven (with sponsorship decals), Team Yamaha Blue and new Liquid Silver have an MSRP of $9,599 and will be in dealers soon. For those who need a bit more bling, you might want to wait an extra month for the $9,799 Cadmium Yellow version with flames to arrive in showrooms.
The 2006/2007 R6 was revered for its radical styling and sharp handling, but its relative lack of midrange grunt made it less desirable for typical streetbike use. This new iteration is better in most every conceivable way, but it remains saddled with a racer-oriented design. The bulk of its engine output is still in the upper ranges, the handlebars put more pressure on a riderís wrists, thereís not a lot of wind protection from the fairing, and the seat height is among the tallest in the class.
But for all those R6 riders who take their bikes to the track, itís hard to imagine a better tool for learning to go faster while giggling like a schoolboy inside your helmet. In this environment, there might not be a better choice than the eager R6 and the operatic soundtrack as it shrieks to its 16,500-rpm redline.
Is this í08 version good enough to command an extra 300 bucks? You betcha!
In addtion to the comprehensive R6 video that automatically loads in this article, we've also put together an exciting couple of on-board laps for your viewing pleasure. Click on this link to see it.
|The Perfect Bike ForÖ|
|An experienced sportbike enthusiast who wants to look like a hero at the track and at the bike nights, and one who isnít afraid of accessing the big numbers at the far end of the tachometer.|
- Aural and visceral delight above 10,000 rpm
- Limp low-end power