At least the roads were good. Funny the things you think of when you're lost. I panicked a little bit. I wondered what would happen if I ran out of gas or broke down, or worse yet, if the weather caught up with me. Hey, it snows here, doesn't it? I thought about how much of a klutz I was for leaving my cell phone back at the hotel.
I also thought about why I was riding alone along one of the two-laners that threads its way around the many lakes and estuaries of this land. Left around one lake, right around another, over, under and through the woods. Rinse and repeat. And repeat I did. I didn't have to think about that one for long thanks to the new Victory Vegas I was here to ride. From the Vegas's sculpted and scalloped tank to its easy-access oil-filter, the machine I spent a day with turned out to be a very well thought out machine. Penned by Polaris's own team of industrial designers, this newest Victory implements the latest in modern design and construction principles--things I got to see firsthand during a tour of Victory's engine facility and R&D center.Victory designed the Vegas from the ground up purely in the virtual world. Using computers to design the entire motorcycle allowed for rapid prototyping and quick and easy fitting exercises before any parts were ever cast in metal. This new-fangled method of design has been in use in the automotive business for years, and is now making its way slowly but surely into the motorcycle realm. Other automotive-like advances for the Vegas include its onboard computer system: A Visteon supplied OBD-2 engine management system ensures the fuel injection system injects the fuel at the appropriate intervals.
The 1507cc Freedom engine--a single-overhead-cam four-valve per cylinder design--makes sure the engine is up to technological spec. Hydraulic lifters are used, thus allowing for a virtually maintenance-free valve train. That little radiator in front of the forward cylinder head is for the oil, which also has the task of lubing and cooling the transmission and clutch. The 50-degree V-twin utilizes an udersquare 97 x 102mm bore and stroke with a fairly conservative 9.2:1 compression ratio. A single 44mm throttle body feeds air into the engine. A counterbalancer is included to smooth out the works, enough so much that the engine can be rigid-mounted to the chassis. The linkage for the rear suspension is attached to the chassis by way of the engine, in fact, and only the bars are isolated via rubber grommets.The Freedom engine isnt't new; it's the same one that powered the V92 series of cruisers. The powerplant as found in the Vegas, however, has been tweaked to provide a more enjoyable riding experience. Gear selection has been improved by the use of a redesigned shift detent mechanism, and the previously oil-cooled engine has been redesigned for air/oil cooling. Transmission and engine are now morel solidly linked together, too, to provide a more rigid platform.
The chassis, on the other hand, is all new. Victory wanted a comfortable bike first, and a bike to perform well second. To do that, they researched the competition and came up with an "optimum" ergonomic profile. From there, they worked with their customers to provide a package that would be most comfortable for as much of their potential clientele as possible. A worthy goal no doubt, and a highly desireable one in a cruiser.
From shortest to tallest, none of the riders I was with complained about ergonomics. All control locations felt neutral. The only piece of ergonomic hardware this tester noticed was the vestigial backrest, during high-speed stints on straight sections of road where it made a great rest against the wind. Everything's nicely tucked under a seat only 26.5 inches (673 mm) from your soles. The transmission -- a weak link in some Victorys -- proved to be seamless, and compared to some V-twin cruisers, is for all intents and purposes, perfect. While some testers would've liked a six-speed -- and the motor could certainly pull a taller top gear -- the five-speed should be fine for 99 percent of what the Vegas will be asked to do.Clutch actuation was fine, as are the bike's Brembo brakes. Victory de-tuned the front brake to salve the fears of, presumably, uneducated riders. Initial bite is somewhat lacking as a result, but a healthy tug on the right hand lever does an adequate job slowing the machine. Try as I might, I wasn't able to get the front wheel to lock up. No big deal, and I bet replacing the stock pad with something more aggressive would result in more aggressive front brake feel. The rear brake is fairly typical cruiser fare.
Special attention was given to the suspension, with progressive springs up front and a straight-rate spring with a rising-rate linkage out back. This linkage is actuated via an aluminum swingarm. In order to provide a plusher, more forgiving ride, damping was increased while spring rate decreased. The only adjustment available is to the rear preload, via threaded collar.
While the technical bits combine to make a cruiser that handles superbly and consistently, the style bits are what really set this bike apart. The separation between the seat and gas tank is one such area that deserves a second, if not third look. The scalloped tank, and for that matter, the ridge that runs along the middle of the bike from the front fairing straight through the tank, and all the way to the LED taillight, all provide for a decidedly custom appearance. In fact, so custom is this process Victory has applied for patents on the manufacturing procedure.
PAGE 2 And, typical of the cruiser marketplace, Victory is already tooled up and ready with a host of accessories. From aggressive pipes to an optional tachometer kit, Victory has its bases covered. In fact, they also have the only HID (High Intensity Discharge) light kit as an industry-first option if I'm not mistaken.
Victory did a good job keeping the center of gravity as low as possible, a thing that makes the bike feel a lot lighter than its listed 615-pound dry weight would lead you to believe. While 33.1-degrees rake and 134mm trail aren't going to win any sportbike performance contests, for a cruiser the Vegas handles very nimbly and tracks nicely through corners. Dragging hard parts is again too easy, and if there is anything that can be said against the handling of the bike, it's that it's too confidence inspiring for its own ground clearance. The chassis gives a lot of feedback, and seems content to lean much farther. Must remember it's a Cruuuuuiser... maybe a performance footpeg mount should also be in the list of accessories?
Victory by Design
-- meanwhile, back in OsceolaIf the R&D and engine facility is any indication as to how serious Victory is about its motorcycles, all I can say is that these guy're extremely serious. Victory personnel highlighted numerous points during our tour of these facilities. For example, rods and cranks are "matched" by tolerance. Nothing manufactured is perfect, so upon receipt of connecting rods and cranks, each is measured and matched--looser big ends with bigger crank journals, etc. This keeps tolerances between these two critical parts as tight as possible. To aid in construction, tolerances are split into three ranges and color-coded.
So what happens if, heaven forbid, you throw a rod or need a new crank? Well, just by knowing your engine case number, Victory can print out a specification sheet that lists all the vitals about your particular engine. Want to know how much torque the third case bolt from the right was tightened to? They have it. In fact, all of the tools utilized in construction of the
Freedom engines are monitored by a central data control system. At each engine build station, there is a bar code reader that scans the engine before any work gets done to it. From there the computer is kept apprised of what is going on with each engine, step by step at each and every station.
Engine: Oil/air cooled, 50° Freedom V-twin Bore x Stroke: 97x102mm Displacement: 92cu. in. (1507cc) Compression Ratio: 9.2:1 Vavle Train: SOHC, 4 valves per cylinder, self-adjusting cam chains hydraulic lifters Fuel Delivery: EFI/44mm throttle bodies Fuel Capacity: 4.5 gal./17.0 l Oil Capacity: 6.0 qts/5.7 l Charging System: 38 amps Primary Drive: Gear drive with torque compensator Clutch: Wet/multi-plate Transmission: 5-speed constant mesh Final Drive: Fiberglass reinforced belt drive Front Brake: Brembo 300mm floating rotor with 4-piston caliper Rear Brake: Brembo 300mm floating rotor with 2-piston caliper Length: 96.3 in/2445mm Wheelbase: 66.5 in/1690mm Seat Height: 26.5 in/673mm Ground Clearance: 5.8 in/148mm Rake-Trail: 33.1°-5.28 in/134mm Dry Weight: 615 lbs/280kg Front Suspension: 43mm diameter, 5.1 in/130mm travel Rear Suspension: Triangulated swing arm, 3.9 in/100mm travel, single shock prelad adjustable Front Wheel: 21.0x2.15 in/40-spoke laced aluminum Rear Wheel: 18.0x4.5 in/40-spoke laced aluminum Front Tire: 80-90/21 Dunlop Cruisemax Rear Tire: 170-60VB/18 Dunlop K591 Elite SP Colors: Vogue Silver, Sonic Blue, Black, Solar Red, Flame Yellow