Motorcycle.com

lovebites · 02-21-2010, 01:25 PM

hi im new and really need some advice i have a suzuki bandit import 400 v
my bike was working fine and i left it for two days and when i tried to start it it wasnt firing right i have had it looked at and was told it could be the cdi unit which i have had checked and that is in working order so does any one have any knowledge they can part my way many thanks .

The_AirHawk · 02-21-2010, 02:08 PM

Fuel - Air - Spark - Timing. If you've got all 4, it will run. Remove (or shift sufficiently one way or another in the case of Timing) any one of those: it won't.

lovebites · 02-22-2010, 01:55 AM

ive got three out of those four it dosent seem to be firing in the right order someone has surgested to me to change the plugs around but as this is all new to me what would be the best route ????

MOKE1K · 02-22-2010, 03:50 AM

Have you tested the coils? Remember the plug wires should be numbered and will only reach so far. As long as they are stock you shouldn't beable switch them from one cylinder to another.

evilmind · 03-05-2010, 12:19 AM

im just asking question to all motorcycle enthusiast.where to buy clutch
of raider j pro.the clutch of raider 150 is compatible to raider j pro?im from phil.manila

02-21-2010, 01:25 PM	#1
lovebites Registered Member Join Date: Feb 2010 Posts: 2	help needed with bandit import 400 (v) hi im new and really need some advice i have a suzuki bandit import 400 v my bike was working fine and i left it for two days and when i tried to start it it wasnt firing right i have had it looked at and was told it could be the cdi unit which i have had checked and that is in working order so does any one have any knowledge they can part my way many thanks .

02-21-2010, 02:08 PM	#2
The_AirHawk Founding Member Join Date: Jun 2007 Location: Livin' in a Van: down by the Mariana Trench Posts: 10,891	Fuel - Air - Spark - Timing. If you've got all 4, it will run. Remove (or shift sufficiently one way or another in the case of Timing) any one of those: it won't. __________________ *Parfois, on fait pas semblant* Sometimes, it's not pretend Oderint Dum Metuant Let them hate so long as they fear политики предпочитают безоружных крестьян Politicians Prefer Unarmed Peasants Nothing to see here, Citizen. Move along now...

02-22-2010, 03:50 AM	#4
MOKE1K Registered Member Join Date: Jul 2008 Location: Kalapana, Big Island Posts: 3,956	Have you tested the coils? Remember the plug wires should be numbered and will only reach so far. As long as they are stock you shouldn't beable switch them from one cylinder to another. __________________ "YOU CAN'T BOLT ON SKILL" "The only thing limiting your bike, is you" We survived Bush you'll survive Obama! "the most fundamental fact about the ideas of the political left is that they do not work. therefore we should not be surprised to find the left concentrated in institutions where ideas do not have to work in order to survive." --thomas sowell

Sponsored Links	Remove Advertisements
Motorcycle Forum Advertisement

02-22-2010, 01:55 AM	#3
lovebites Registered Member Join Date: Feb 2010 Posts: 2	ive got three out of those four it dosent seem to be firing in the right order someone has surgested to me to change the plugs around but as this is all new to me what would be the best route ????

03-05-2010, 12:19 AM	#5
evilmind Registered Member Join Date: Mar 2010 Posts: 1	im just asking question to all motorcycle enthusiast.where to buy clutch of raider j pro.the clutch of raider 150 is compatible to raider j pro?im from phil.manila