Motorcycle.com

eevans · 08-31-2007, 05:19 PM

can anyone tell me how to set the timming marks on a 250 ninja kawasaki took off the head now i need to redo the timming thanks eevans

mscuddy · 08-31-2007, 05:50 PM

Match up the red marks on the stator, Make sure you have the intake valve open on no,2. line up the flybob. Use kawasaki timing chain masterlink, buy masterlink riveting tool. Purchase way too much beer for working on a bike in this hot weather. Was that intake valve open? or exhaust...? lose the 13mm open end, you can't find it. but, you will find 5 12mm open-ends though...and next time you have to use a 12mm, you won't fine one anywhere. All day. It's now 3pm and it's gotta be, what ,a hundred and five degrees in the shade? Down a few more Olys. Step on the new head gasket by mistake and bend it in half. But, squished down in a vice, it looks fine now. Like new. It's now 7 pm, and the old lady is calling you to stop, and come in the house. That's good for three more hours, at least. Around 11pm, 8 or 9 beers later, when placing teensy tiny cam chain masterlink in chain, you loose your grip, and drop the masterlink into the lower end. Plink. Sweat is burning your eyes now, and you want to go inside, lay down...guess you should have BOUGHT THE MANUAL!?!?!?

The_AirHawk · 08-31-2007, 08:00 PM

I'll have to down a few more and study on this a bit.

I'll get back to you, soon as I recover from the Hangover..........

HighsideHarry · 09-02-2007, 10:12 AM

I'll bet he forgot to mention that he needed the bike to get to his new job the next day.

08-31-2007, 05:19 PM	#1
eevans Registered Member Join Date: Aug 2007 Posts: 1	timming can anyone tell me how to set the timming marks on a 250 ninja kawasaki took off the head now i need to redo the timming thanks eevans

08-31-2007, 05:50 PM	#2
mscuddy MODERATOR X Join Date: Jun 2007 Location: Next to my still checkin the temp. Posts: 5,447	Match up the red marks on the stator, Make sure you have the intake valve open on no,2. line up the flybob. Use kawasaki timing chain masterlink, buy masterlink riveting tool. Purchase way too much beer for working on a bike in this hot weather. Was that intake valve open? or exhaust...? lose the 13mm open end, you can't find it. but, you will find 5 12mm open-ends though...and next time you have to use a 12mm, you won't fine one anywhere. All day. It's now 3pm and it's gotta be, what ,a hundred and five degrees in the shade? Down a few more Olys. Step on the new head gasket by mistake and bend it in half. But, squished down in a vice, it looks fine now. Like new. It's now 7 pm, and the old lady is calling you to stop, and come in the house. That's good for three more hours, at least. Around 11pm, 8 or 9 beers later, when placing teensy tiny cam chain masterlink in chain, you loose your grip, and drop the masterlink into the lower end. Plink. Sweat is burning your eyes now, and you want to go inside, lay down...guess you should have BOUGHT THE MANUAL!?!?!? __________________ A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that. Last edited by mscuddy : 08-31-2007 at 05:58 PM.

08-31-2007, 08:00 PM	#3
The_AirHawk Founding Member Join Date: Jun 2007 Location: Leanin' Tower O' P-P-P-P-POWAAAAAAAAA!!!! Posts: 11,426	I'll have to down a few more and study on this a bit. I'll get back to you, soon as I recover from the Hangover.......... __________________ *Parfois, on fait pas semblant* Sometimes, it's not pretend Oderint Dum Metuant Let them hate so long as they fear политики предпочитают безоружных крестьян Politicians Prefer Unarmed Peasants Nothing to see here, Citizen. Move along now...

Sponsored Links	Remove Advertisements
Motorcycle Forum Advertisement

09-02-2007, 10:12 AM	#4
HighsideHarry Founding Member Join Date: Nov 2001 Posts: 86	I'll bet he forgot to mention that he needed the bike to get to his new job the next day.