Go Back   Motorcycle Forum > Motorcycle.Com General Discussion > Motorcycle Mods and Maintenance

Reply
 
Thread Tools
Old 10-19-2009, 02:40 PM   #1
perfectnorth
Registered Member
 
Join Date: Oct 2009
Posts: 2
Default 86 Honda VT700c vacuum hose routing

I have removed the carbs for cleaning and did not note vacuum hose placement, I know, not smart. anyway i know that the hose from the joint tube is vented, not connected. Ok so there is a hose on the inside side of the right side carb where does that hose go? And the hose that comes off the back of the VALVE ASSY., AIR CUT where does this go?

thanks for the help
perfectnorth is offline   Reply With Quote

Sponsored Links Remove Advertisements
Motorcycle Forum
Advertisement
Old 10-19-2009, 03:28 PM   #2
mscuddy
MODERATOR X

 
mscuddy's Avatar
 
Join Date: Jun 2007
Location: Next to my still checkin the temp.
Posts: 5,448
Default

The vented carb hose goes to a small fitting that equilizes the manifold pressure, stops reverse osmosis/and taited gas. The hose of the back of the valve asssembly goes round the airbox exactly THREE times, then exits down by the drive chain. The joint tube is not vented btw, it pressurizes the manifold diaphram and revents road junk like candy wrappers and ciggie buts from being sucked into the airbox/diatillation unit.

There, I hope that helped some.
__________________
A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that.
mscuddy is offline   Reply With Quote
Old 10-19-2009, 05:15 PM   #3
perfectnorth
Registered Member
 
Join Date: Oct 2009
Posts: 2
Default

all clear to me
perfectnorth is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off