Motorcycle.com

The_AirHawk · 05-31-2007, 05:36 PM

Razorblade.

seruzawa · 05-31-2007, 05:56 PM

There are two major methods:

1- On an HD unwrap the bailing wire and duct tape from the grip and pull it off with vise grips.

2- On Japanese bikes turn the bike in at the nearest junkyard and buy a new one.

schizuki · 05-31-2007, 06:00 PM

I've always cut mine off. Sometimes I even don't break the throttle assembly.

eminelga · 05-31-2007, 06:04 PM

All I had to do was unscrew the bar ends, and got the grip off by wiggling a screw driver between the bar & grip. I was also replacing the handle bars so I wasn't worried about scratches. I did find that some "Goof-Off" residue remover helped the process.

mscuddy · 05-31-2007, 06:07 PM

Take it to the shop, have them do it. They are paid professionals, with years of experience. Do not try it at home, as it might result in permanent injury or miserable death.

Buzglyd · 05-31-2007, 06:14 PM

Beat me to the punch!

Fenton · 05-31-2007, 06:20 PM

Put a little pine-tar on the old ones and save the 7 bucks and having to go through cutting them off with a razorblade and sliding the new ones on with a little hairspray

nthn04hd · 05-31-2007, 06:51 PM

squirt a little WD40 into the grip and with a little effort they should slid off

BrowningBAR · 05-31-2007, 07:02 PM

Reverse that.

Kreb_Cycle · 05-31-2007, 09:56 PM

miserable injury or permanent death?

05-31-2007, 05:36 PM	#1
The_AirHawk Founding Member Join Date: Jun 2007 Location: Livin' in a Van: down by the Mariana Trench Posts: 10,891	Re: Need Help On Installing New Grips Razorblade. __________________ *Parfois, on fait pas semblant* Sometimes, it's not pretend Oderint Dum Metuant Let them hate so long as they fear политики предпочитают безоружных крестьян Politicians Prefer Unarmed Peasants Nothing to see here, Citizen. Move along now...

05-31-2007, 05:56 PM	#2
seruzawa Robby Join Date: Nov 2001 Location: 8501 ft. Posts: 16,803	Re: Need Help On Installing New Grips There are two major methods: 1- On an HD unwrap the bailing wire and duct tape from the grip and pull it off with vise grips. 2- On Japanese bikes turn the bike in at the nearest junkyard and buy a new one. __________________ I've seen things you people wouldn't believe. Attack ships on fire off the shoulder of Orion. I watched c-beams glitter in the dark near the Tanhauser Gate. All those moments will be lost in time, like tears in the rain.

05-31-2007, 06:00 PM	#3
schizuki Founding Member Join Date: Nov 2001 Posts: 4,413	Re: Need Help On Installing New Grips I've always cut mine off. Sometimes I even don't break the throttle assembly. __________________ “[The video] should be sent for example to ABC, CBS, NBC, and CNN and maybe PBS and VOA. As for Fox News, let her die in her anger... I used to think that MSNBC channel may be good and neutral a bit, but is has lately fired two of the most famous journalists – Keith Olbermann and Octavia Nasser.” - Al-Qaeda spokesman Adam Gadahn. Or any American lefty.

05-31-2007, 06:04 PM	#4
eminelga Registered Member Join Date: Jun 2007 Posts: 3	Re: Need Help On Installing New Grips All I had to do was unscrew the bar ends, and got the grip off by wiggling a screw driver between the bar & grip. I was also replacing the handle bars so I wasn't worried about scratches. I did find that some "Goof-Off" residue remover helped the process.

05-31-2007, 06:07 PM	#5
mscuddy MODERATOR X Join Date: Jun 2007 Location: Next to my still checkin the temp. Posts: 5,444	Re: Need Help On Installing New Gripes Take it to the shop, have them do it. They are paid professionals, with years of experience. Do not try it at home, as it might result in permanent injury or miserable death. __________________ A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that.

Sponsored Links	Remove Advertisements
Motorcycle Forum Advertisement

05-31-2007, 06:14 PM	#6
Buzglyd Founding Member Join Date: Nov 2001 Posts: 10,137	Re: Need Help On Installing New Grips Beat me to the punch! __________________ Jay Leno: "President Obama released his tax returns. It turns out he made $900,000 less in 2011 than he did in 2010. You know what that means? Even Obama is doing worse under President Obama."

05-31-2007, 06:20 PM	#7
Fenton Founding Member Join Date: Jun 2007 Location: Arvada, CO Posts: 1,898	Re: Need Help On Installing New Grips Put a little pine-tar on the old ones and save the 7 bucks and having to go through cutting them off with a razorblade and sliding the new ones on with a little hairspray

05-31-2007, 06:51 PM	#8
nthn04hd Registered Member Join Date: Jun 2007 Posts: 3	Re: Need Help On Installing New Grips squirt a little WD40 into the grip and with a little effort they should slid off

05-31-2007, 07:02 PM	#9
BrowningBAR Snuggles Join Date: Jun 2007 Location: In a really, really, really old farmhouse Posts: 4,364	Re: Need Help On Installing New Gripes Reverse that.

05-31-2007, 09:56 PM	#10
Kreb_Cycle Registered Member Join Date: Jun 2007 Location: Seattle Posts: 872	Re: Need Help On Installing New Gripes miserable injury or permanent death? __________________ He was a fattish but active man of paralyzing stupidity, a mass of imbecile enthusiasms—one of those completely unquestioning, devoted drudges on whom, more even than on the thought police, the stability of the Party depended. - George Orwell _1984_